Combiner

This versatile box is built with our premium TRSP-2 transformer for 
optimum durability. 
• Use fewer input channels by combining two mic lines into one. 
• Combine two mics out of phase to remove background noise and feedback. 
• Correct and combine phase when using a pair of mics above 
  and below a drum.

Input Impedance: 150 Ohms x 2 
Output Impedance: 150 Ohms 
Operating Level: -50dBu to -10dBu 
Frequency Response: 20Hz-20kHz ±1dB 

Click Here For Full Size Picture

IMP LINE LEVEL COMBINER (IMCOML) Use the line level combiner when you want to create a mono mix from a stereo source but need to keep the original stereo signals isolated. It's great for feeding a DAT player or CD into a mono system or single channel on a board. The LLC not only combines two line-level signals into one line level output, it also compensates for the 6dB of gain that occurs when two in-phase signals are combined. A handy ground-lift switch breaks the shield connection between the inputs.

Frequency response: ±0.3dB 20Hz-20kHz 
Total harmonic distortion + noise: (0.025% at 1kHz 
Isolation between inputs") 42dB 
Insertion loss: -0.6dB, 50 Ohms source impedance -3.8dB, 200 Ohms source impedance 
Output level: -3.8dB with both channels at 0dB sine wave input, in phase 
Maximum input level: +28dBm 
Input impedance: 600 Ohms 
Output impedance: 100 Ohms 

Click Here For Full Size Picture

SELECTOR ® This box gives you the ultimate control over your instruments and your gear. You can alternate between channels A and B, or select both. Thanks to our patented, state-of-the-art optical switching, there's no added noise, pops, or crackles. Indestructible foot switches let you make your choice with little effort. Run it on one standard 9V alkaline battery or an optional external 9V power supply (T401-ND). Impedance in and out: 1M Ohms Operating Level: -40dBu to 0dBu Frequency Response: 20Hz-20kHz ±1dB

Click Here For Full Size Picture

MULTISELECTOR This four channel input/output footswitch gives one-step access to your favorite configurations. • Send one input to one of four outputs • Route any one of four inputs to a single output The MultiSelector also features LED indicators and 1/4" unbalanced inputs and outputs. It runs on either two 9V batteries or optional 9V external power supply (T401-ND)

Impedance in and out: 1M Ohms 
Operating Level: -40dBu to 0dBu 
Frequency Response: 20Hz-20kHz ±1dB