ACCESSORIES

CONNECT Series HP1 Stereo Headphones

Lightweight and comfortable design with soft foam earcups for extended listening comfort. Wide frequency response produces clear highs and full bass. 32 Ohm impedance. 100 mW power handling capability. 3.5 mm stereo plug.

SoundChecks Lets you hear while protecting you from loud damaging noise.

You have to try these to believe them! Live Sound • Concerts • Manufacturing Warehouses • Sporting Events Machinery Use (mowers, chainsaws, etc.) • Shooting Ranges Whirlwind SoundChecks apply approximately 30dB of attenuation over the entire audio spectrum. Sonically tuned chambers act as an extension of the ear canal preventing the occlusion effect that occurs with traditional earplugs so that sound is uniformly reduced. In other words, you hear everything you need to, while your ears get better protection than they've ever had before.

Pro Quality Performance High noise reduction across all frequencies No distortion of sound Blocks harmful noise but allows speech and other useful sounds to be heard Comfortable and Secure Lightweight (less than 2 ounces!) Adjustable head band Comfortable for extended use Increased Safety High speech intelligibility Hear shouts or warning signals No need to remove hearing protection to have a conversation Convenient Folds for easy storage in shirt pocket Drops around the neck while not in use WT-1000 Tuner The Whirlwind WT-1000 tuner is an economical and feature packed device. Remarkably sensitive and stable for simple, easy tuning Auto modes for chromatic, guitar, bass and violin as well as manual mode Pitch adjustable from A=433 to A=447 LCD meter as well as sharp / flat LEDs Auto power off Tune from 1/4" input jack or built-in mic Tilt-back stand SNAKESKINTM                                  Braided monofilament provides a layer of extra protection for your cables. Also keeps fanouts tangle free. Available in assorted sizes and colors. Black is the standard color - BK. Other colors available are: BL - blue, BR - brown, GR - green, GY - gray, OR - orange, RD - red, PR - purple, WH - white, YL - yellow, NN - neon. When ordering colors the part number ends in xx - there is a place on the order form to indicate the color.

SHRINK SLEEVING We offer high-grade mil-spec polyolefin heat shrinkable tubing. Shrunken size is approximately half of original diameter. Our standard color is black, with red, blue, white, and clear available in 3/16" and 3/8" sizes.

DUCT TAPE We offer standard 60 yd. X 2" tape in black, white or silver.

CONSOLE MARKING TAPE 1" wide for marking channels on the console, leaves no residue.

PIGBAGS These heavy-duty nylon bags with Velcro closures protect cable ends. The Pigbag-S is ideally suited to small fanouts and the MASS multipin connectors. The Pigbag-L is large enough for any size fanout.

STRAIN RELIEF GRIPS

Use these heavy-duty, 3-piece wire mesh grips and strain 
reliefs for mounting multipair cable to a steel box.

HANGER GRIPS These heavy duty wire mesh hangers are designed for fanouts.

RACK HARDWARE KIT

The RMH-100 is a bag of 100 10-32 x 3/4" black screws with
non-isolating nylon washers to mount and protect equipment
in standard 19" racks and protect the faceplates from marks
caused by screw heads.

Click here for our Rack Panel Section